Category
Technology/equipment
Document Type
Paper
Abstract
Speed skates are the most important part of equipment of a speed skater, where weight, rocker and bend are just a few characteristics that are to a high degree individualized. This poses a challenge for any type of research in speed skating where forces have to be measured in a reliable manner. For this purpose, a 5 degrees of freedom (DoF) instrumented speed skate (VU-Skate) has been designed and validated, weighing only 130 gram extra. Skaters use their own blades and shoes, something skaters are very keen on. A calibration tool has been developed to calibrate the 5 DoF. The quality of the data has been validated in 2 ways: 1. With the use of force plates and 2. By comparing the signals to another (also newly developed) Ultra-light Forces sensor. The results are remarkably good. This is the first step in being able to measure power continuously during each stroke.
Recommended Citation
van der Eb, Jeroen W.; Veeger, Dirkjan; and de Koning, Jos
(2020)
"VALIDATION OF A 5-DOF INSTRUMENTED SPEED SKATE; TOWARDS A POWER METER FOR SPEED SKATING,"
ISBS Proceedings Archive: Vol. 38:
Iss.
1, Article 3.
Available at:
https://commons.nmu.edu/isbs/vol38/iss1/3